HobbyGOAT
GEPRC Tern40 LR V2 O4 Wide Long Range FPV Drone
GEPRC Tern40 LR V2 O4 Wide Long Range FPV Drone
Couldn't load pickup availability
Summary
As an upgrade to the Tern40 LR V2, the Tern40 LR V2 O4 Wide is designed for long-range aerial filming. Its DC frame combines a lightweight design with extended flight time, ideal for wide-area coverage and long flights.
Powered by the GEPRC TAKER F722 AIO and SPEEDX2 1404 motors, it delivers smooth, responsive flight. The camera module features a four-point suspended damping system to reduce vibrations and improve footage stability.
With reliable performance and excellent image stabilization, it offers an enhanced flying experience for FPV enthusiasts and professional pilots.
Feature
- Four-Point Suspended Damping System for stable footage and confident flying.
- GEP-M10nano GPS for fast satellite acquisition and enhanced flight safety.
- Deadcat Frame Design for cleaner forward-facing shots.
- Built-in Buzzer with configurable low-battery and lost-model alarms.
- Fixed XT30 Power Connector for easier battery connection and disconnection.
- Side Plate Ventilation Design for enhanced cooling performance.
Specifications
- Model: Tern40 LR V2 O4 Wide
- Frame: Tern40 LR V2 Frame
- Wheelbase: 186.7 mm
- Top Plate Thickness: 1.5 mm
- Middle Plate Thickness: 2 mm
- Bottom Plate Thickness: 1.5 mm
- Arm Thickness: 4 mm
- Flight Controller: GEPRC TAKER F722 45A 32Bit AIO
- MCU: STM32F722
- Gyroscope: ICM42688-P (SPI)
- OSD: Betaflight OSD w/AT7456E
- ESC: 32Bit 45A
- VTX: DJI O4 Wide Air Unit
- Camera: DJI O4 Wide Air Unit Camera Module
- Antenna: DJI O4 Air Unit Pro Antenna
- Power Connector: XT30
- Motors: 1404 3000KV
- Propellers: HQProp T4X2.5Grey (2CW + 2CCW)
- Weight (O4 Wide PNP Version): 179g±5g
- Receiver Options: PNP / ELRS24 / ELRS915
- Recommended Batteries: LiPo 4S 660mAh–850mAh / 18650 3000mAh
- Flight Time: 12 minutes (with a LiHV 4S 720mAh battery, landing at 3.6V per cell)
Includes
1 × Tern40 LR V2 O4 Wide Drone
2 × HQProp T4X2.5Grey Propeller Sets (2CW + 2CCW)
2 × Battery Anti-Slip Pads
1 × Spare Screw Pack
1 x Tern40 LR V2 Camera Mount 3D-Printed Part (Left)
1 x Tern40 LR V2 Camera Mount 3D-Printed Part (Right)
1 x Tern40 LR V2 BEC Mount 3D-Printed Part
1 x Tern40 LR V2 Side Plate (Left)
1 x Tern40 LR V2 Side Plate (Right)
4 x Silicone Damping Balls
2 × M11*150 mm Battery Straps
2 × M11*200 mm Battery Straps
1 × Hex 4-in-1 Screwdriver
Spare Screws:
4 × M2*3.5 Button Head Hex Screws w/ 7.5 mm Washers
4 × M2*3.5 Flat Head Hex Screws
4 × M2*5 Flat Head Hex Screws
12 × M2*7 Button Head Hex Screw
4 × M2 Hex Nuts















Share
